How to make a sliding box
Moderator: Barto
- patybobady
- PV Pro
- Posts: 383
- Joined: Fri Mar 26, 2004 4:12 pm
- Expertise: High School Coach, Former College Vaulter
- Lifetime Best: 13'9"
- Favorite Vaulter: Derek Miles
- Location: Elmwood Park, IL
- Contact:
How to make a sliding box
Hello. I am looking to construct my own sliding box for my vaulters. I had some homemade ones in college, but do not remember the measurements or the exact process. Any suggestions?
Patrick
Patrick
Fight the good fight: It's nice to be great but it's far greater to be nice.
- Bruce Caldwell
- PV Enthusiast
- Posts: 1783
- Joined: Thu Feb 27, 2003 3:19 pm
- Expertise: It is all about Pole Vaulting. I even catch the competitors poles!
- Lifetime Best: 15'8"
- Favorite Vaulter: Kjell Issakson, Jan Johnson
- Location: DFW TEXAS
- Contact:
- patybobady
- PV Pro
- Posts: 383
- Joined: Fri Mar 26, 2004 4:12 pm
- Expertise: High School Coach, Former College Vaulter
- Lifetime Best: 13'9"
- Favorite Vaulter: Derek Miles
- Location: Elmwood Park, IL
- Contact:
Re: Build one???
ESSX wrote:http://www.everythingtrackandfield.com/detail.aspx_Q_ID_E_3697_A_CategoryID_E_441
Just go here and buy one!!
Bruce
Haha, good try. I put in for the 'pulleey' on our Track wish list, I figured I need both and would have more trouble making the pulley.
Patrick
Fight the good fight: It's nice to be great but it's far greater to be nice.
-
- PV Follower
- Posts: 531
- Joined: Tue Aug 17, 2004 9:38 am
- Expertise: Former College Vaulter, Coach
- Lifetime Best: 16-0(4.88)
- Location: Minneapolis, MN
Re: Build one???
ESSX wrote:http://www.everythingtrackandfield.com/detail.aspx_Q_ID_E_3697_A_CategoryID_E_441
Just go here and buy one!!
Bruce
Almost $300! No way in hell should anyone pay that much for a sliding box! Think of how many wood ones you can make for $300!
Chris Milton
It doesn't have to be exact.
1 4"x4"x8" for the back stop
2 2"x4"x15" for each side.
1 1"x 15" x 24" piece of plywood for the bottom
Use 3" wood screws to piece it all together. countersink them in the bottom so the box slides easily.
It'll cost like $10 bucks and it'll last a season.
We could make them in like 20 minutes after the initial prototype.
1 4"x4"x8" for the back stop
2 2"x4"x15" for each side.
1 1"x 15" x 24" piece of plywood for the bottom
Use 3" wood screws to piece it all together. countersink them in the bottom so the box slides easily.
It'll cost like $10 bucks and it'll last a season.
We could make them in like 20 minutes after the initial prototype.
"You have some interesting coaching theories that seem to have little potential."
-
- PV Master
- Posts: 681
- Joined: Mon Jul 14, 2003 12:42 pm
- Location: illinois
- Contact:
Re: Build one???
cdmilton wrote:ESSX wrote:http://www.everythingtrackandfield.com/detail.aspx_Q_ID_E_3697_A_CategoryID_E_441
Just go here and buy one!!
Bruce
Almost $300! No way in hell should anyone pay that much for a sliding box! Think of how many wood ones you can make for $300!
im thinking...i would make 1 and use the balance to buy a pole to do the drills with
- ashcraftpv
- That one guy
- Posts: 1202
- Joined: Thu Sep 12, 2002 1:06 pm
- Expertise: Former College Vaulter (D1), Current High School Coach, 1999 Outdoor Big Ten Champion
- Lifetime Best: 5.25m
- World Record Holder?: Renaud Lavillenie
- Favorite Vaulter: Jason Hinkin
- Location: Gig Harbor, WA
- Contact:
http://www.skyjumpers.com/articles/Slid ... Design.doc
I had a couple kids in the wood shop class build me 4 of these for a project and they are pretty much indestructible because they used pressure treated wood and sealed all the joints and screw holes.....
Have had them for 4 seasons now....
I had a couple kids in the wood shop class build me 4 of these for a project and they are pretty much indestructible because they used pressure treated wood and sealed all the joints and screw holes.....
Have had them for 4 seasons now....
Last edited by ashcraftpv on Fri Feb 03, 2006 6:47 pm, edited 1 time in total.
PoleVaultPlanet is coming.....
-
- PV Nerd
- Posts: 75
- Joined: Tue Jul 05, 2005 1:41 pm
- Location: On the Web
- Contact:
slide box
Ok, heres the deal... I do camps all the time and I have constructed the most affordable and efficient slide box around. Sure its home made but this is how it works.
Go to wallmart. buy 2 small sterlite storage boxes usually they are grey or blue in color. Run them long ways and cut down three sides leaving the top open. Place a ten pound wieght in between them and seal it up (ducktape use 102)...
Slides awesome on a track, grass, concrete. etc. Here are some pictures if you need.
Honestly the storage boxes are about $3-$4 each and the weight at walmart is about $10. PM me for questions.
as far as the pulley drill I make my own also but it takes time and a bit more money... the ones I make are ovver half the price they sell them in the catalogs. -Vaultiletics
Check this site out for a pic
http://www.sterilite.com/Category.html? ... tegory=33#
Go to wallmart. buy 2 small sterlite storage boxes usually they are grey or blue in color. Run them long ways and cut down three sides leaving the top open. Place a ten pound wieght in between them and seal it up (ducktape use 102)...
Slides awesome on a track, grass, concrete. etc. Here are some pictures if you need.
Honestly the storage boxes are about $3-$4 each and the weight at walmart is about $10. PM me for questions.
as far as the pulley drill I make my own also but it takes time and a bit more money... the ones I make are ovver half the price they sell them in the catalogs. -Vaultiletics
Check this site out for a pic
http://www.sterilite.com/Category.html? ... tegory=33#
- Bruce Caldwell
- PV Enthusiast
- Posts: 1783
- Joined: Thu Feb 27, 2003 3:19 pm
- Expertise: It is all about Pole Vaulting. I even catch the competitors poles!
- Lifetime Best: 15'8"
- Favorite Vaulter: Kjell Issakson, Jan Johnson
- Location: DFW TEXAS
- Contact:
BOY THAT IS TIGHT GRIN
You spend $300 to $500 for a pole, $150 for a discus, $400 for a javelin,
$10,000 for a pV pit?????????
$6,000 to $12,000 for your first car.
You need it now there it is in stock ready to ship and it is functional????
Hey I make no money on this one, but I would take this over a wooden one, as it is adjustable weighted and functional. SMILE
Bruce
$10,000 for a pV pit?????????
$6,000 to $12,000 for your first car.
You need it now there it is in stock ready to ship and it is functional????
Hey I make no money on this one, but I would take this over a wooden one, as it is adjustable weighted and functional. SMILE
Bruce
-
- PV Master
- Posts: 681
- Joined: Mon Jul 14, 2003 12:42 pm
- Location: illinois
- Contact:
Re: BOY THAT IS TIGHT GRIN
ESSX wrote:You spend $300 to $500 for a pole, $150 for a discus, $400 for a javelin,
$10,000 for a pV pit?????????
$6,000 to $12,000 for your first car.
You need it now there it is in stock ready to ship and it is functional????
Hey I make no money on this one, but I would take this over a wooden one, as it is adjustable weighted and functional. SMILE
Bruce
ok, i checked the link and it looked like great product, but i would still put those funds toward the pole unless money was no object.
speaking of money is no object, this is one of my favorite overpriced items(i should note that ucs spirit makes great products, so i dont mean to pick on them, but come on, it is ribbon attached to a stick for > $400)
click the link and scroll down to "wind direction unit"
http://www.ec-securehost.com/UCSInc/Mea ... vices.html
enjoy
Return to “Pole Vault - Equipment”
Who is online
Users browsing this forum: No registered users and 23 guests