make your own pit

A forum to discuss everything to do with pole vaulting equipment: poles, pits, spikes, etc.

Moderator: Barto

User avatar
Maine Vaulter
PV Wannabe
Posts: 32
Joined: Sun Jun 11, 2006 9:52 pm
Contact:

make your own pit

Unread postby Maine Vaulter » Mon Jun 19, 2006 1:50 pm

has anyone built your own pit? if so how?

User avatar
AVC Coach
PV Lover
Posts: 1386
Joined: Fri May 23, 2003 9:21 am
Expertise: Former College Vaulter, Current Coach (All levels)
World Record Holder?: Renaud Lavillenie
Favorite Vaulter: Miah Sanders
Location: Black Springs, Arkansas
Contact:

Unread postby AVC Coach » Mon Jun 19, 2006 4:51 pm

Probably not a good idea. :eek:

Unless you build one with used pieces from other "real" pits, it's a recipe for disaster.

User avatar
theczar
PV Follower
Posts: 560
Joined: Sun Apr 23, 2006 6:16 pm
Expertise: Coach/Former College Athlete
Lifetime Best: 17'1"
Location: Queensland, Australia

Unread postby theczar » Mon Jun 19, 2006 4:57 pm

^^^agreed

three most important rules of the vault:

1)SAFETY
2)SAFETY
3)SAFETY

User avatar
rainbowgirl28
I'm in Charge
Posts: 30435
Joined: Sat Aug 31, 2002 1:59 pm
Expertise: Former College Vaulter, I coach and officiate as life allows
Lifetime Best: 11'6"
Gender: Female
World Record Holder?: Renaud Lavillenie
Favorite Vaulter: Casey Carrigan
Location: A Temperate Island
Contact:

Unread postby rainbowgirl28 » Mon Jun 19, 2006 5:43 pm

Pits are expensive because foam rubber is expensive. If there were a cheaper way to be making a SAFE pit, somebody would be doing it.

Skyin' Brian
PV Master
Posts: 681
Joined: Mon Jul 14, 2003 12:42 pm
Location: illinois
Contact:

Unread postby Skyin' Brian » Mon Jun 19, 2006 5:54 pm

step 1 - find an old above ground pool that somebody is throwing away
step 2 - steal a LOT of those little plastic balls from a McDonalds playland
step 3 - fill pool with balls
step 4 - dig 8" hole in ground for box
step 5 - "borrow" a pole from your local high school
step 6 - VAULT!
step 7 - sue the makers of those little plastic balls when you get seriously hurt, you may not be pole vaulting again any times soon, but at least you will have some serious cash, probably more than enough to buy one of those fancy pits!

User avatar
Maverick986
PV Fan
Posts: 50
Joined: Tue Apr 18, 2006 11:12 am
Location: Daytona Beach, FL
Contact:

Unread postby Maverick986 » Mon Jun 19, 2006 7:50 pm

Skyin' Brian wrote:step 1 - find an old above ground pool that somebody is throwing away
step 2 - steal a LOT of those little plastic balls from a McDonalds playland
step 3 - fill pool with balls
step 4 - dig 8" hole in ground for box
step 5 - "borrow" a pole from your local high school
step 6 - VAULT!
step 7 - sue the makers of those little plastic balls when you get seriously hurt, you may not be pole vaulting again any times soon, but at least you will have some serious cash, probably more than enough to buy one of those fancy pits!


rofl i love it

User avatar
Rhino
PV Pro
Posts: 271
Joined: Thu Aug 21, 2003 4:36 pm
Location: Florida

Unread postby Rhino » Mon Jun 19, 2006 9:46 pm

Thirty years ago most all small schools had homemade pits. Within the last couple of years, I came upon an ad for pit bags on the internet, so they are still available. There's a foam place in Daytona that let me have all the scrap foam I wanted for free, which I put in 44" cubic feed bags (filled only to half depth). I got rid of my homemade pit when I found a better place for me and my daughters to vault, since my pit was a bit unsightly for my neighborhood.

mtisfullofit
PV Newbie
Posts: 10
Joined: Mon Feb 15, 2016 1:40 am
Expertise: HS coach
World Record Holder?: Renaud Lavillenie
Favorite Vaulter: bubka

Re: make your own pit

Unread postby mtisfullofit » Sun Mar 06, 2016 3:01 pm

Any old timers remember metal poles and pits made from chunks of foam sewn in fishnet bags. just had to revive an old post. It can be done but I am not sure I would want to be jumping 16' on those old mats. Matt rash!!!!!!!!!!!!


Return to “Pole Vault - Equipment”

Who is online

Users browsing this forum: No registered users and 9 guests