Metric/English-all is answered

A forum to discuss anything that has to do with pole vaulting that does not fit in the other forums.

Moderators: Russ, lonpvh

User avatar
souleman
PV Lover
Posts: 1015
Joined: Tue Dec 28, 2004 5:56 pm
Lifetime Best: 12-7.5
Favorite Vaulter: Bob Seagren, Bob Richards
Location: Wyoming, Minnesota
Contact:

Unread postby souleman » Fri Jun 24, 2005 1:39 pm

Thanks John. Mike

26mi235
PV Newbie
Posts: 10
Joined: Mon Sep 19, 2005 11:53 pm
Location: Madison, WI

Unread postby 26mi235 » Fri Nov 04, 2005 6:20 pm

vaultmd wrote:One interesting (and irritating) thing that I think you've noticed is that there are meets where the competition is in imperial units but then 11'6" gets reported the next day as something like 11'5 and some fraction. I find that kids coming from HS are not very familiar with metric, but a couple of years in college starts to get most of them comfortable. On complication, particularly for women, is that bar extensions (downward) seem to always be calibrated in feet, not in metric, which complicates the adjsutments to the values listed on the standards.

I think this occurs because the result (at least in NCAA and USATF meets) has to be reported in metric units. If an imperial height is between two metric heights, then the result gets rounded down to the lower of the two metric heights. Then when it gets converted back for the newspaper the next day, if the metric result is between two imperial increments, it can get rounded down again.


You should try to always have the meets have the official height in metric and then post the Imperial version for people's information. That way you do not lose credit for a height. This is especially important for PRs and qualifying. Fortunately, the 10 cm ~ 4 inches and 30+ cm ~ 1 foot are useful relationships that you can use to go up or down from one or two marks that you try to hard-wire (for instance, if you are a 16-foot vaulter, basing heights off of 5 meters -- 16' 4.75") allows you to quickly assess what the height is in Imperial.

As an official, I find that it is easiest to just go the one direction. There are so many things going on in the vault, especially with a large field and usually not having many assistants, that anything that makes it more controlled is really desireable (and safer). In my experience, the vault is the hardest event to officiate, although there are a number that I have not done.
26Mi235

User avatar
osjb44
PV Beginner
Posts: 28
Joined: Sun Mar 19, 2006 2:57 am
Location: ocean springs, ms

Unread postby osjb44 » Sat Apr 22, 2006 2:20 pm

at least now I don't have to keep going to ask jeeves to get conversions
>>Joey<<

User avatar
Bruce Caldwell
PV Enthusiast
Posts: 1783
Joined: Thu Feb 27, 2003 3:19 pm
Expertise: It is all about Pole Vaulting. I even catch the competitors poles!
Lifetime Best: 15'8"
Favorite Vaulter: Kjell Issakson, Jan Johnson
Location: DFW TEXAS
Contact:

I am posting to bring this one back up

Unread postby Bruce Caldwell » Thu May 18, 2006 9:17 am

I am posting to bring this one back up the list one of most helpful post on the forum thanks PV JUNKIE

Bruce

pelle3
PV Whiz
Posts: 149
Joined: Sat Jan 21, 2006 6:19 am
Location: SE
Contact:

Unread postby pelle3 » Mon Jun 19, 2006 4:45 pm

http://usatf.org/statistics/calculators ... nversions/

(Every increment:s exact conversion from imperial to metric, and the reverse).

User avatar
rainbowgirl28
I'm in Charge
Posts: 30435
Joined: Sat Aug 31, 2002 1:59 pm
Expertise: Former College Vaulter, I coach and officiate as life allows
Lifetime Best: 11'6"
Gender: Female
World Record Holder?: Renaud Lavillenie
Favorite Vaulter: Casey Carrigan
Location: A Temperate Island
Contact:

Unread postby rainbowgirl28 » Mon Jun 19, 2006 5:36 pm

pelle3 wrote:http://usatf.org/statistics/calculators/markConversions/

(Every increment:s exact conversion from imperial to metric, and the reverse).


BOOKMARKED

I will use this every week this summer when I am typing up results from the all-comers meet.

User avatar
TOMAS
PV Wannabe
Posts: 32
Joined: Sun Mar 20, 2005 2:25 pm
Location: Poland Z.G.
Contact:

Unread postby TOMAS » Sat Jul 01, 2006 9:52 am

I think the IAAF or other organizations must do something with this! It would be only one Metric ,all countries are using meters , only USA have this stupid metric !

User avatar
theczar
PV Follower
Posts: 560
Joined: Sun Apr 23, 2006 6:16 pm
Expertise: Coach/Former College Athlete
Lifetime Best: 17'1"
Location: Queensland, Australia

Unread postby theczar » Sat Jul 01, 2006 9:57 am

we like being different :)

User avatar
TOMAS
PV Wannabe
Posts: 32
Joined: Sun Mar 20, 2005 2:25 pm
Location: Poland Z.G.
Contact:

Unread postby TOMAS » Sun Jul 02, 2006 10:59 am

but this difrent make problem to easy comunicating , for example you telling my that you are jumping 16-8 or something like that and I don't know how high is that first I must check it in table or calculator !

User avatar
tigervaulter727
PV Whiz
Posts: 198
Joined: Thu May 18, 2006 6:06 pm

Unread postby tigervaulter727 » Sun Mar 18, 2007 6:11 pm

just a tip, but if you want to know for someone else's results or something you can just type it in your internet search bar "___ meters to feet" and it will convert it for you! :D

HHSPVCoach
PV Nerd
Posts: 75
Joined: Thu May 12, 2005 12:41 pm
Expertise: Former HS and college vaulter, now HS and college coach
Favorite Vaulter: Bubka, duh!
Location: Hemlock, MI
Contact:

Unread postby HHSPVCoach » Fri Aug 31, 2007 11:55 am

And lets not forget about those standards settings! I actually have this as an excel spreadsheet or a pdf file if anyone wants a copy, just email me. Sorry for the poor formatting here, all i did was a copy and paste.

Coach Phil

cm in.
40 15.7
41 16.1
42 16.5
43 16.9
44 17.3
45 17.7
46 18.1
47 18.5
48 18.9
49 19.3
50 19.7
51 20.1
52 20.5
53 20.9
54 21.3
55 21.7
56 22.0
57 22.4
58 22.8
59 23.2
60 23.6
61 24.0
62 24.4
63 24.8
64 25.2
65 25.6
66 26.0
67 26.4
68 26.8
69 27.2
70 27.6
71 28.0
72 28.3
73 28.7
74 29.1
75 29.5
76 29.9
77 30.3
78 30.7
79 31.1
80 31.5

in. cm
15.5 39.4
16 40.6
17 43.2
18 45.7
19 48.3
20 50.8
21 53.3
22 55.9
23 58.4
24 61.0
25 63.5
26 66.0
27 68.6
28 71.1
29 73.7
30 76.2
31 78.7
31.5 80.0

User avatar
dafox
PV Whiz
Posts: 163
Joined: Tue Apr 15, 2003 5:49 pm
Location: Huntington Beach, CA
Contact:

Unread postby dafox » Fri Jul 04, 2008 3:03 am

Here's a function to convert meters into feet and inches.
Paste this into Excel cell B1:

Code: Select all

=TRUNC(CONVERT(A1,"m","ft"),0)&"' "&MROUND((ROUND(CONVERT(A1,"m","ft")-TRUNC(CONVERT(A1,"m","ft"),0),2))*12,1/4)&""""

This assumes metric mark (in meters) is in A1. Pasting that into B1 will format 4.90 as: 16' 0.75"
All inches are converted to 1/4" increments.


Return to “Pole Vault - General”

Who is online

Users browsing this forum: No registered users and 17 guests